Best Beginner Workouts With Flat Bench To Build Muscle Mass

The Dumbbell Bench Press is a great exercise for beginners that targets the chest, triceps, and shoulders. Using dumbbells helps improve stability and ensures both sides of the body work equally without compensating for weaknesses.

How to do it

1. Lie back on a bench, squeezing your shoulder blades together.
2. Place your feet flat on the ground, under your knees.
3. Hold the dumbbells outside shoulder-width apart, above your chest.
4. Keep your elbows at a 45-degree angle and engage your core.
5. Extend your arms fully and then lower the dumbbells back to starting position.

The Dumbbell Fly is an effective exercise for strengthening and building the chest muscles. It also engages the shoulders for support. This exercise helps to develop muscle balance by working each side of the body independently.

How to do it

1. Lie on your back on a bench, squeezing your shoulder blades together and keeping your feet flat on the ground.
2. Ensure the bench supports your head, shoulders, and buttocks.
3. Hold the dumbbells above your shoulders with palms facing inward and elbows slightly bent.
4. Engage your core and slowly lower the dumbbells out to the sides in a wide arc, keeping your elbows slightly bent.
5. When the dumbbells are level with your chest, exhale and lift them back to the starting position.

The Dumbbell Row is a great exercise that strengthens your back, shoulders, and biceps while also engaging your core for stability. You can do this exercise using a flat bench and dumbbells, making it accessible even with limited equipment.

How to do it

1. Place a dumbbell on each side of a flat bench.
2. Kneel on the bench with your right knee and place your right hand on the bench's edge.
3. Keep your torso parallel to the ground and grab the dumbbell with your left hand, palm facing your torso.
4. Pull the dumbbell up to your side, engaging your back; exhale as you lift.
5. Pause briefly at the top, then lower the dumbbell back to the starting position.

The Dumbbell Skullcrusher is a great exercise for strengthening your triceps. Using dumbbells helps ensure both arms work equally and adds a challenge to your stability.

How to do it

1. Lie on your back on a bench with your shoulder blades squeezed together and feet flat on the floor.
2. Ensure the bench supports your head, shoulders, and hips.
3. Hold dumbbells above your shoulders with palms facing each other and elbows slightly bent.
4. Engage your core and lower the dumbbells behind your head by bending your elbows, keeping your upper arms stable.
5. When the dumbbells are just above your forehead, exhale and lift them back to the starting position.

Skullcrushers are a triceps exercise performed while lying on a bench. This movement focuses on isolating the triceps and can be done with an EZ-Bar for better grip and stability.

How to do it

1. Lie back on a bench, keeping your shoulder blades squeezed and your heels flat on the ground.
2. Ensure the bench supports your head, shoulders, and buttocks at all times.
3. Hold the EZ-Bar above your shoulders with hands shoulder-width apart.
4. Keep your upper arms still and bend your elbows to lower the bar just above your forehead.
5. Exhale as you extend your arms to lift the bar back to the starting position.

The Dumbbell Shoulder Press is an exercise that focuses on strengthening the shoulders. Using dumbbells helps engage stabilizing muscles and can improve balance between both sides of the body.

How to do it

1. Sit on a bench with your back straight.
2. Hold a dumbbell in each hand, just outside shoulder-width, palms facing forward.
3. Bend your elbows and keep them close to your sides.
4. Press the dumbbells overhead until your arms are fully extended, keeping your wrists straight.
5. Lower the dumbbells back to the starting position.

The Smith Machine Bench Press is a chest exercise that works your triceps and shoulders too. The Smith Machine helps keep the movement steady, making it easier to focus on properly performing the exercise.

How to do it

1. Lie on your back on a bench with your shoulder blades squeezed together.
2. Make sure your head, shoulders, and butt stay on the bench.
3. Place your feet flat on the ground and keep your knees bent.
4. Position the bar over your chest, holding it just outside shoulder-width with an overhand grip.
5. Engage your core and unhook the bar, lowering it slowly towards your chest while keeping your elbows at a 45-degree angle.
6. Touch your chest gently with the bar, then exhale and push it back to the starting position.

The Dumbbell Squeeze Press is an exercise that mainly works your chest, shoulders, and triceps. By pressing the dumbbells together, you keep constant tension on your chest, making it effective without needing extra equipment.

How to do it

1. Lie flat on a bench with a dumbbell in each hand, palms facing in, resting on your chest.
2. Press the dumbbells together and raise them above your chest, extending your arms.
3. Keep pressing the dumbbells together as you lower them back to the starting position.

The Dumbbell Larson Press is a chest exercise that targets your chest, shoulders, and triceps without using your legs for support. By elevating your legs, you focus more on upper body strength and stability, helping improve your bench press form.

How to do it

1. Hold a dumbbell in each hand.
2. Lie back on a flat bench with your legs extended and toes pointing up.
3. Position the dumbbells wider than shoulder-width, palms facing your feet.
4. Keep your head, shoulders, and hips on the bench.
5. Press the dumbbells above your chest, engaging your chest muscles.
6. Pause at the top, then slowly lower the dumbbells back down.

The Leg Raise With Dumbbell Pull Over is a workout combining a leg raise and a dumbbell pull over. This exercise works your core, shoulders, and back, helping to improve strength and stability.

How to do it

1. Hold a dumbbell with both hands, gripping the head firmly.
2. Lie back on a flat bench with the dumbbell resting on your chest.
3. Lift your legs off the ground, extending them straight up.
4. Move the dumbbell overhead, keeping your arms straight up from your shoulders.
5. Engage your core and press your back against the bench.
6. Lower your arms and legs together towards the floor in a controlled motion.
7. Pause briefly at the bottom, then pull the arms and legs back up to the starting position.

The EZ Bar PJR Pull Over is an exercise that works your lats, triceps, and chest. Using an EZ-Bar makes the grip more comfortable and helps stretch the muscles effectively, which is great for building upper body strength.

How to do it

1. Lie flat on a bench, keeping your shoulder blades on it.
2. Hold the EZ-Bar above your chest with arms straight.
3. Bend your elbows to 90 degrees, keeping your triceps tight.
4. Lower the EZ-Bar behind your head with control.
5. Pull the EZ-Bar back over your chest using your back muscles.
6. Extend your arms to return to the starting position.

The EZ-Bar Pull Over is an effective exercise for building strength in the upper back and chest, while also working the shoulders and triceps. It uses an EZ-Bar which allows for a comfortable grip and helps maintain stability during the movement.

How to do it

1. Lie on a flat bench with your shoulder blades touching it.
2. Grab the EZ-Bar with both hands above your chest, arms straight.
3. Bend your elbows to form a 90-degree angle, keeping your triceps tight.
4. Slowly lift the EZ-Bar over your head while keeping your arms steady.
5. Engage your back and triceps to bring the EZ-Bar back over your chest.

The Bench Dip is a simple bodyweight exercise that mainly works your triceps. It’s easier than regular dips because your feet stay on the ground, making it perfect for beginners to build strength towards full dips.

How to do it

1. Sit on a bench with your hands next to your hips, palms down.
2. Move your body forward, lowering your hips off the bench while keeping your feet on the ground.
3. Bend your elbows and lower your hips until your upper arms are parallel to the ground, keeping your chest up.
4. Push back up by extending your elbows to return to the starting position.

The Elevated Hip Bridge is a challenging move that targets your glutes by elevating your feet on a surface like a bench. This variation improves your range of motion for better muscle engagement during the exercise.

How to do it

1. Lie on your back with your feet on a step or box, hip-width apart and knees bent at 90 degrees.
2. Place your arms at your sides, palms facing down.
3. Tilt your hips slightly while engaging your abdomen to keep your back flat.
4. Lift your hips by squeezing your glutes until your body forms a straight line from your knees to your shoulders.
5. Lower your hips back down to the ground in a controlled manner.

The Smith Machine Close-Grip Bench Press is a safe way to strengthen your triceps, chest, and shoulders. This exercise focuses on your triceps, helping to build arm strength and muscle definition, making it great for beginners and experienced lifters alike.

How to do it

1. Lie on a bench and squeeze your shoulder blades together. Keep your heels flat on the floor.
2. Ensure the bench touches your head, shoulders, and butt throughout the exercise.
3. Position the Smith Machine bar over your lower chest and grip it with your hands directly above your shoulders.
4. Brace your core, unhook the bar, and lower it to your chest by bending your elbows.
5. Gently touch your chest with the bar, then exhale and push it back to the starting position.