Best Workouts With Cable Machines To Build Muscle Mass

The Cable Row is an exercise that strengthens your back, shoulders, and biceps. It uses a cable machine for proper positioning and resistance control, helping you build muscle and strength in your upper body.

How to do it

1. Sit on the bench and place your feet on the foot plates.
2. Hold the handle with both hands, keeping your back straight.
3. Pull the handle towards your torso while leaning back slightly.
4. Squeeze your shoulder blades together at the end of the movement.
5. Slowly return to the starting position while maintaining tension in your back.

The Lat Pulldown is a great exercise for strengthening your back, shoulders, and biceps. It's similar to a Pull Up but is more stable, making it easier for beginners to control the movement and adjust the resistance.

How to do it

1. Attach a bar to the pull-down pulley and grip it with your hands shoulder-width apart, palms facing forward.
2. Sit upright on the seat, placing your knees under the adjustable pad.
3. Engage your core and keep your spine straight.
4. Pull the bar down towards your chest by bending your elbows, leaning back slightly.
5. Slowly return the bar to the starting position.

The Cable Rope Tricep Extension is a great exercise to specifically strengthen your triceps. Using a cable machine allows for better control and consistent tension, making it ideal for adjusting weights easily and performing high-repetition sets.

How to do it

1. Set the pulley to the highest position and attach the rope.
2. Hold the rope with your palms facing each other, elbows at your sides, bent at 90 degrees.
3. Engage your core and keep your back straight.
4. Extend your arms by straightening your elbows while keeping them close to your body.
5. Return to the starting position by bending your elbows.

The Cable Crossover Fly is a chest exercise that uses cables to maintain tension and control. This exercise helps isolate different parts of the chest for a focused workout.

How to do it

1. Set the pulleys to just above head height.
2. Stand with one foot forward, holding the pulley handles at shoulder height with palms facing forward.
3. Engage your core and keep your spine straight.
4. With arms extended, sweep the handles down in a wide arc towards the bottom of your ribcage.
5. Return to the starting position.

The Cable Lateral Raise is a shoulder exercise that targets the middle deltoid muscle. Using a cable machine allows for better control and can help identify strength differences between your left and right sides.

How to do it

1. Adjust the pulley to the lowest position and attach a handle.
2. Stand with feet shoulder-width apart, facing the pulley with your left side.
3. Grab the handle with your right hand, keep your palm facing in.
4. Tighten your core to maintain a straight back.
5. With a slightly bent elbow, raise the handle to shoulder height while rotating it slightly upwards.
6. Lower the handle back to the starting position and repeat on the other side.

The Cable Face Pull is an exercise that strengthens your shoulder muscles, especially the rear deltoids. It uses a cable machine, allowing you to easily control the resistance by adjusting the pulley height or your distance from the machine.

How to do it

1. Set the pulley to chin height and attach a rope.
2. Stand with one foot slightly in front of the other and grip the rope with both hands.
3. Step back until the cable is taut, with your arms extended.
4. Keep your arms parallel to the ground and engage your core as you pull the rope towards your chin, letting your hands move apart slightly.
5. When the rope is in front of your chin, return to the starting position.

Shotgun Row is a back exercise that uses a cable machine. It targets each side separately, helping to improve strength balance and add variety to your routine.

How to do it

1. Set the pulley at the lowest position with a handle attachment.
2. Grip the handle with an overhand grip and step back about 2-3 feet, keeping your feet slightly wider than shoulder-width apart.
3. Engage your core and hinge at your hips to lean forward slightly.
4. Pull the handle with your right arm, bringing your elbow close to your side.
5. Return the handle to the start position and repeat with your left arm.

The Single Arm Cable Press is a great exercise for strengthening your chest, shoulders, and triceps. It helps identify and fix strength differences between your arms while mimicking the motion of throwing a punch, making it useful for combat sports.

How to do it

1. Set the cable machine's pulley at solar plexus height.
2. Attach a handle to the cable.
3. Stand in front of the machine with one hand in line with the handle.
4. Hold the handle in one hand with your palm facing in.
5. Step away until there is tension in the cable.
6. Get into a slight lunge position.
7. Engage your core and keep your back straight as you look forward.
8. Extend the arm not holding the handle in front of you and bring the handle arm to your side at chest height.
9. Push the handle forward as if throwing a punch, while pulling your other arm back.
10. Pause for a moment, avoiding twisting your body.
11. Return to the starting position with control and tension.
12. Repeat on the other side.

Cable Hip Extension is an exercise where you attach your leg to a cable machine and extend it behind you while standing. This helps strengthen your glutes and improve balance, as the cable provides controlled resistance.

How to do it

1. Set the pulley to the lowest position and attach the ankle cuff to your right ankle.
2. Stand facing the pulley with your feet hip-width apart, holding the frame for support.
3. Engage your core and keep your back straight.
4. With a slight bend in your knee, extend your right leg behind you by squeezing your glute.
5. Return to the starting position and switch to your left leg.

Cable Crunch is an exercise that strengthens your core using a cable machine instead of just your body weight. You perform it while kneeling, allowing for greater control over the resistance and direction of the movement.

How to do it

1. Set the cable pulley to the highest position and attach a rope.
2. Kneel upright and hold the rope ends, placing the base on the back of your neck.
3. Bend forward at the hips until your torso is parallel to the floor, then curl your ribs towards your hips.
4. Return to the starting position.

The Cable Chest Press is a great exercise for working your chest, shoulders, and triceps. Using cable machines keeps tension on your muscles and lets you adjust the direction of the resistance.

How to do it

1. Set the cable pulleys just above shoulder height.
2. Sit with your back against the seat and hold the handles at chest height, shoulder-width apart, with palms facing down.
3. Engage your core to keep your back straight.
4. Push your arms forward while keeping the handles at shoulder level.
5. Return to the starting position by bending your elbows.

The Cable Rear Delt Fly targets the rear shoulders to improve your shoulder balance and posture. Using a cable machine allows for better muscle activation with constant tension. This exercise also strengthens the upper back and helps correct shoulder imbalances.

How to do it

1. Adjust the pulleys to just above your eye level.
2. Stand facing the pulleys with your feet shoulder-width apart.
3. Grab the left pulley with your right hand and the right pulley with your left hand.
4. Engage your core and extend your arms out to the sides, keeping them straight.
5. Pause briefly when your arms are fully extended, then slowly return to the starting position.

The Cable Shoulder Press is an exercise that strengthens your shoulder muscles, especially the front and middle parts. Using cables keeps tension on the muscles, improving stability and control during the movement.

How to do it

1. Set the pulleys to the lowest position and attach the handles.
2. Stand with your feet shoulder-width apart, holding the handles outside your shoulders, palms facing forward, and elbows by your sides.
3. Press the handles overhead until your arms are straight and in line with your ears, then lower them back down.

The Freemotion Shoulder Press is a beginner-friendly exercise that targets your shoulder muscles. Using a Freemotion machine helps you maintain stability, making it easier to control your movements and focus on your form.

How to do it

1. Adjust the dual pulleys to the lowest position with handle attachments.
2. Stand with your feet shoulder-width apart, holding the handles at shoulder height with palms facing forward and elbows close to your sides.
3. Press the handles overhead until your arms are fully extended, keeping your wrists and forearms straight.
4. Lower the handles back to the starting position to repeat the exercise.

The Incline Cable Chest Press strengthens the upper chest muscles by using cables at an incline. This exercise helps improve muscle growth and provides added safety for your joints while also engaging your core.

How to do it

1. Set the pulleys to just above shoulder height.
2. Sit against the seat, holding the pulley handles at chest height with palms facing down.
3. Engage your core to maintain a neutral spine.
4. Push your arms forward, keeping elbows slightly below shoulders.
5. Return to start by bending your elbows and bringing the handles back.